Used Rigs
Augers Core Barrels and Buckets
Prineville, OR
ID:
$50,000
54 tools: mix of rock and dirt augers, core barrels, and clean-out buckets.
https://www.bayshoresystems.com/wp-content/uploads/2025/06/Augers.jpg
Augers Core Barrels and Buckets
50,000
Prineville, OR
54 tools, a mix of dirt augers, rock augers, core barrels, and clean-out buckets ranging in size from 12" to 108". Most tools have a 5-3/4 kelly box, but some sizes vary from 2-1/2" to 8". Option to purchase all 54 tools as a bundle or there's an option to split the bundle and purchase select tools in a separate bundle.
2621
LōDril LLMHT50 (2001)
Rathdrum, Idaho
ID:
$140,000
LōDril LLM50, mounted on CAT 330BL, 43,000 ft-lbs rotary torque, 50' drill depth
https://www.bayshoresystems.com/wp-content/uploads/2025/06/2001-LoDril-LLMHT50-scaled.jpg
LōDril LLMHT50 (2001)
140,000
Rathdrum, Idaho
LLMHT50 mounted on Cat 330BL equipped with 25,000 lb Kelly winch, a round locking Kelly bar set in addition to the square Kelly bar set,18' attachment height with 9,500 hours.
2617
Timber Pro TR40-16 (2017)
Rathdrum, Idaho
ID: 561
$450,000
43,000 ft-lbs torque; 45 ft hole depth; n/a hours
https://www.bayshoresystems.com/wp-content/uploads/2022/01/Timber-Pro-TR40-16-2017.jpg
Timber Pro TR40-16 (2017)
450,000
Rathdrum, Idaho
561
50,000 ft-lb torque, 65ft drilling depth, 78,000 lbs shipping weight
43,000 ft-lbs
25,000 lbs
45 ft
2572
Sunward SA-20/70 (2006)
Tukwila, WA
ID:
$160,000
Sunward SA-20/70, round friction Kelly bar set and 165,000 ft-lbs rotary torque
https://www.bayshoresystems.com/wp-content/uploads/2025/02/Sunward1-Photoroom.jpg
Sunward SA-20/70 (2006)
160,000
Tukwila, WA
Sunward SA-20/70, with 600 hours and 5 element round friction kelly bar set.
165,000 ft-lbs
40,466 lb Line Pull (Max)
164 ft
2498
LoDril DH40-50
Calhoun, GA
ID:
$285,000
LoDril DH40-50, round locking Kelly bar set and 43,000 ft-lbs rotary torque
https://www.bayshoresystems.com/wp-content/uploads/2025/01/Untitled-design-13.png
LoDril DH40-50
285,000
Calhoun, GA
LōDril DH40-50, on an EC300 EL with 2,167 hours, 48' drilling depth, 24" crowd, 5 element round locking kelly bar, 6,000 lb additional counterweight
43,000 ft-lbs
18,000 lbs
48
2477
TR25-63 Tayo
ID:
$513,000
TR25-63 on a Komatsu PC170, 63 ft square locking Kelly bar set and 25,000 ft-lbs rotary torque
https://www.bayshoresystems.com/wp-content/uploads/2024/12/Tayo1.jpg
TR25-63 Tayo
513,000
TR25-63 mounted to a Komatsu PC170; 12,000lb service winch; custom boom; 5,000lb additional counterweight; 63 ft square locking Kelly bars
25,000 ft lbs
15,000 lbs Single Layer Winch
63 ft
2447
TR50-63 KC Kat
ID:
$590,000
TR50-63 on a Komatsu PC170, 63 ft square locking Kelly bar set and 50,000 ft-lbs rotary torque
https://www.bayshoresystems.com/wp-content/uploads/2024/12/Foghorn.png
TR50-63 KC Kat
590,000
TR50-63 mounted to a Komatsu PC170; 8,000lb service winch; custom boom; 8,000lb additional counterweight; 63 ft square locking Kelly bars
50,000 ft-lbs
25,000 lbs single layer kelly winch
63 ft
2442
E6050
Baton Rouge, LA
ID: 127
$605,000
55 ft hole depth, 3541 hours, 50 ft Kelly bar set (4 element) and 40 ft Kelly bar set (3 element)
https://www.bayshoresystems.com/wp-content/uploads/2024/12/DH39-Photoroom-e1735587174861.jpg
E6050
605,000
Baton Rouge, LA
127
55 ft hole depth, 3541 hours, 50 ft Kelly bar set (4 element) and 40 ft Kelly bar set (3 element)
55 ft
2438
E6050
Baton Rouge, LA
ID: 126
$605,000
55 ft hole depth, 2673 hours, 50 ft Kelly bar set (4 element) and 40 ft Kelly bar set (3 element)
https://www.bayshoresystems.com/wp-content/uploads/2024/12/DR40.39.2.png
E6050
605,000
Baton Rouge, LA
126
55 ft hole depth, 2673 hours, 50 ft Kelly bar set (4 element) and 40 ft Kelly bar set (3 element)
55 ft
2436
TR150-80
ID:
$299,000
TR150-80 on a CAT 345 DL, 80' square locking Kelly bar set and 150,000 ft-lbs rotary torque
https://www.bayshoresystems.com/wp-content/uploads/2024/11/Untitled-design-15.png
TR150-80
299,000
TR150-80 mounted to a CAT345 DL; 40,000lb line pull single layer kelly winch; 12,000lb service winch; custom boom; 8,000lb additional counterweight; 80' square locking kelly bars
150,000 ft-lbs
40,000lb line pull, single layer
80 ft
2390
LōDril LLM-30
California, USA
ID:
$120,000
LōDril LLM-30 mounted on Cat 318
https://www.bayshoresystems.com/wp-content/uploads/2024/10/Reinbeck-1.jpg
LōDril LLM-30
120,000
California, USA
LLM-30 mounted on Cat 318 with 12,891 hours.
2385
LōDril LLMHTFB-40
Oklahoma
ID: 2302
$92,400
LōDril LLMHTFB-40 available; round kelly bar set for 40ft drill depth; 36,00 ft lbs torque, Electronic level/depth sensor Carrier: John Deere 8920 E LC
https://www.bayshoresystems.com/wp-content/uploads/2024/04/LoDrill-Pic-5-Resize-.jpg
LōDril LLMHTFB-40
92,400
Oklahoma
2302
Round locking kelly bar set for 40ft drill depth; 36,00 ft lbs torque, Electronic level/depth sensor, Pullmaster 25,000 lb Kelly Winch. Carrier: John Deere 892 E LC.
36,000 ft-lbs
25,000 lbs
40 ft
2302
LōDril LM-50 (2007)
California, USA
ID: 2158
Original Price: $245,000
Sale Price: $175,000
2007 Kobelco ED190; 50 ft. hole depth; 18,000 ft-lbs. torque; 10,000 hours
https://www.bayshoresystems.com/wp-content/uploads/2023/06/LM50-2007-edited.jpg
LōDril LM-50 (2007)
175,000
California, USA
2158
18,000ft-lbs of torque, 50 ft drilling depth, 10,000 hours, 5-element (4 telescoping) square kelly bar set; Carrier: 2007 Kobelco ED190
18,000 ft-lbs
12,000 lbs
50 ft
2287
LōDril LMP-45 (2006)
Gilroy, CA
ID: 2265
Original Price: $175,000
Sale Price: $159,000
Used LōDril LMP-45 available; 45ft drilling depth; Carrier: 2005 Caterpillar 312CL with approximately 4,500 hours
https://www.bayshoresystems.com/wp-content/uploads/2024/02/LMP-45.jpg
LōDril LMP-45 (2006)
159,000
Gilroy, CA
2265
36” crowd stroke; 6 element (5 telescoping) square kelly bar set; 3” solid 4140 heat-treated inner kelly bar; 3” kelly stub with 1” hole; Captivated inner kelly; Level and depth indicator; Total estimated transport weight is 32,000 lbs.; Tools: 30" auger and extension
10,000 ft-lbs
5,000 lb. first layer line pull capacity kelly winch
45 ft
2265
LōDril TR40-50 (2017)
Colorado Springs, CO
ID: 2248
$425,000
TR40-50 available; kelly bar set for 50ft drill depth; Kelly bar set for 30ft square kelly bar set; Carrier: Komatsu PC170-LC11
https://www.bayshoresystems.com/wp-content/uploads/2024/02/TR40-Front.jpg
LōDril TR40-50 (2017)
425,000
Colorado Springs, CO
2248
(2) Kelly bar sets; (1) 30ft square Kelly bar set; (1) 50ft square Kelly bar set; Carrier: Komatsu PC170-LC11; 140" Crowd Stroke; Hydraulic interface panel - included; Level and Depth indicator - included; Kelly Winch rapid reverse upgrade; Additional Counterweight: 8,500lbs.
43,000 ft-lbs
18,000 lb. first layer line pull capacity kelly winch
50 ft, 30ft
2248
LōDril DH30 (2014)
Beaumont, TX
ID: 2227
$325,000
LōDril DH30; 80ft. hole depth; 30,000 ft-lbs rotary torque; Carrier: Komatsu PC290-LC10
https://www.bayshoresystems.com/wp-content/uploads/2023/11/Used-DH30-edited.jpg
LōDril DH30 (2014)
325,000
Beaumont, TX
2227
LōDril DH30; 18,000lb first layer line pull capacity kelly winch; Carrier: Komatsu PC290-LC10; Estimated Transport Weight: 83,000lbs; 6 element (5 telescoping) square kelly bar set; 66" Crowd stroke; Level and depth indicator; Hydraulic interface panel for mounting to Komatsu PC290-LC10
30,000 ft-lbs
80 ft
2227
LōDril TRt40-55 (2021)
California, USA
ID: 2202
Original Price: $795,000
Sale Price: $650,000
LoDril TRt40-55; 5 element (4 telescoping) square kelly bar set for 55ft. drilling depth; 43,000 ft-lbs. torque, 227 hours
https://www.bayshoresystems.com/wp-content/uploads/2023/10/Trt50-edited.jpg
LōDril TRt40-55 (2021)
650,000
California, USA
2202
2022 6x6 Kenworth T880 with EZ Trac (2,959 miles); 5 element(4 telescoping) square kelly bar set; 227 hours; Kelly bar dewatering holes; Level and depth indicator
43,000 ft-lbs
55 ft
2202
LōDril LM40 (1997)
Blanchard, ID
ID: 2183
$79,000
1997 Komatsu PC-150; 40 ft. drilling depth; 16,000 ft-lbs. torque; 11,487 hours
https://www.bayshoresystems.com/wp-content/uploads/2023/09/LM601997.jpg
LōDril LM40 (1997)
79,000
Blanchard, ID
2183
40 ft. square kelly bar set; 42 in. hole diameter; Carrier: Komatsu PC-150; 11,487 hours; Weight: 35,000lbs
16,000 ft-lbs
40 ft
2183
LōDril TR50-51
Nebraska, USA
ID: 2129
$475,000
50,000 ft-lbs torque; 51 ft hole depth; 375 hours on drill; 5643 hours on excavator
https://www.bayshoresystems.com/wp-content/uploads/2023/06/LoDrilTR50-51-e1743795611238.png
LōDril TR50-51
475,000
Nebraska, USA
2129
50,000 ft-lbs torque; 51 ft hole depth; 4 element(3 telescoping) square kelly bar set; Hydraulic interface panel for mounting to CAT 320CL; Level and Depth indicator - included; Estimated transport weight: 62,000lbs.
50,000 ft-lbs
18,000 lb. first layer line pull capacity kelly winch
51 ft
2129
TR200-60 (2017)
Harrison, AR
ID: 2126
$615,250
200,000 ft-lbs torque; 60 ft hole depth; Carrier: 2016 Volvo EC480
https://www.bayshoresystems.com/wp-content/uploads/2023/06/TR200LongsSold.png
TR200-60 (2017)
615,250
Harrison, AR
2126
200,000 ft-lbs torque; 60 ft hole depth; 4 element(3 telescoping) round locking kelly bar set; Overhead powerline detector kit - included; Level and depth indicator - included; Hydraulic interface panel - included; Transport weight: 155,000 lbs.; Additional counterweight: 14,000 lbs.
200,000 ft-lbs
50,000 lb. first layer line pull capacity service winch
60 ft
2126
LōDril LLM-60 (1998)
Anaheim, CA, USA
ID: 2101
$119,000
24,000 ft-lbs torque, 60 ft hole depth, 8455 hours, 5-element (4 telescoping) square kelly bar set
https://www.bayshoresystems.com/wp-content/uploads/2023/04/LoDril-LLM-601998edited.jpg
LōDril LLM-60 (1998)
119,000
Anaheim, CA, USA
2101
24,000 ft-lbs torque, 60 ft hole depth, 18' 6" attachment height,1998 Link-Belt 4300 carrier (ENGINE UPGRADED TO TEIR 4F)
24,000 ft-lbs
60 ft
2101
LōDril DH60 (2010)
Rosamond, CA, USA
ID: 2077
$525,000
62,000 ft-lbs torque, 60 ft hole depth, 4,068 hours, 4 kelly sets
https://www.bayshoresystems.com/wp-content/uploads/2023/02/kV-Structures-Used-DH60_edited.jpg
LōDril DH60 (2010)
525,000
Rosamond, CA, USA
2077
62,000 ft-lbs torque, 60 ft hole depth, 4068 hours, additional bar sets and tooling include: 60' round locking kelly bar set (5 element), 54' square kely bar set (6 element) - attachment height 16'6", 32' round locking kelly bar set (5 element) -attachment height 16'6", spare set of boom & stick cylinders, bolt-on rubber pads not included in price
62,000 ft-lbs
60 ft
2077
TRt70 (2014)
Rosamond, CA, USA
ID: 2075
$575,000
70,000 ft-lbs torque, 70 ft hole depth, 1,590 hours
https://www.bayshoresystems.com/wp-content/uploads/2023/02/kV-Structures-Used-Trt70_edited.jpg
TRt70 (2014)
575,000
Rosamond, CA, USA
2075
70,000 ft-lbs torque, 70 ft hole depth, 1590 hours
70000 ft lbs
70 ft
2075
Texoma 700-60 (1999)
Michigan, USA
ID: 1387
$125,000
75,377 ft-lbs torque; 60 ft hole depth; 6,425 hours
https://www.bayshoresystems.com/wp-content/uploads/2022/03/Texoma-700-60-1999.jpg
Texoma 700-60 (1999)
125,000
Michigan, USA
1387
75,377 ft-lbs torque; 60 ft hole depth; 6,425 hours
75,377 ft-lbs
12,000 lbs
60 ft
1387
